How can I change or add the language to the
camera by using OLYMPUS Master/ Plus?
Please see the following.
Here is the description of the operation in OLYMPUS Master
Plus Ver. 1.0.
Be sure to connect thecomputer to the Internet
before performing the following operations.
Please follow the
- Click the [Browse Images]
Before you connect your camera with the computer,
please start OLYMPUS Master and click [Browse
Images] icon on the OLYMPUS
Master main menu.
- From the [Online Service] menu in the [Browse]
window, select [Update Camera].
Please click [Online Service] button
in the toolbar located at the top of the window, and select [ Update Camera ] from the pull-down menu.
- Connecting the camera to a computer.
Please connect the digital camera to your computer
using a USB cable.
- Follow the instructions on the screen to access
the OLYMPUS server.
When connected to the server, [Update
Camera] dialog box appears. Please click [OK] button.
- Click the [Check for latest version] button.
When the following windows appears, please click [Check for latest version] button.
An error message may be displayed, if you click [Cancel] button and remove
a camera from a computer. When an error message is displayed,
please exit OLYMPUS Master first and remove a camera from
- Select the additional language.
Please select the firmware and the language you want to add from the
pull-down menu, and then click [Update] button to go on.
*Here comes the case when you selected "Swedish".
- Click the [Next] button.
When OK is displayed on the LCD display of the digital camera, as
shown on the right in the dialg box bilow, downloading the addtional
language is complete. Please click [Next] button.
- Click the [Close] button.
When the following windows appears, please disconnect the camera from
you computer and click [Close] button.
(*It looks like different under different OSs.)
(1) The following instructions apply to Windows
XP/ 2000/ 98SE.
(2) The following instructions apply to Windows
All procedure is complete.