||The Super FP Mode can be used
with an external flash.
||When external flash is mounted,
the built-in flash does not pop up.
||An external flash does not
function as exclusive flash. It can be used at Auto and
Manual Modes. The T/W can be changed at Manual Mode only.
||To use an external flash,
Flash Controller, FC-1 is required. ( packaged with Ring
Flash Set SRF-11/Twin Flash set STF-22 )
The FR-1 Flash Adapter Ring is used to mount a Macro
Flash on ZUIKO DIGITAL ED 50mm F2.0 Macro Lens or ZUIKO
DIGITAL 35mm F3.5 Macro Lens.
||The FP-1 Flash Power Grip
can be used for the FL-50 electronic flash that is available
as an optional accessory.
||Requires FL-CB02 Bracket Cable
and RG-1 Remote Grip Cable.
||Requires FL-CB02 Bracket Cable,
RG-1 Remote Grip Cable and HLD-3 Power Battery Holder.
||Requires FL-CB02 Bracket Cable.
The cameras have no remote cable terminal, and RG-1 Remote
Grip Cable cannot be used. The release button for FP-1
Flash Power Grip does not function.
||The FL-CB02 Bracket Cable
is required to connect FP-1 Flash Power Grip with camera.
||The RG-1 Remote Grip Cable
is required to use the release button on FP-1 Flash Power
||The HLD-3 Power Battery Holder
||External power source for
the FL-50 Electronic Flash and FC-1 Flash Controller.
||Exclusive power source for HV-1 High Voltage Pack . ( packaged with flash high voltage set )
||The FL-50R / FL-36R does not
allow wireless flash control.
||MANUAL flash mode cannot be used.
||FL-LM1 is packaged with the E-PL3 and E-PM1. FL-LM2 is packaged with the E-M5.